
A PERFECT FIT
Sized for modern MTB and gravel rims - no trimming, no scissors, no guesswork.
HIGH-STICK ADHESIVE
Holds tight under pressure without lifting or slipping, even on wider rim beds.
RESETTABLE FIT
Strong but repositionable if needed - smooth install, zero stress.
Aussie-Trail Tested
Ridden hard and pressure-washed through Derby, Bright, and Narra.
Gnarly Tubeless Tape - Fitment & Compatibility
Rim Compatability
All tubeless-ready Hooked and Hookless MTB, Gravel & Road Rims
MTB
Up to 30 PSI - Use Yellow (Low Pressure) Tape
GRAVEL
Under 40PSI - Use Yellow (Low Pressure) Tape / Above 40PSI - Use Black
ROAD
Use Black (High Pressure) Tape
Adhesive
Super-sticky adhesive resists lift and edge creep
Sealant Compatability
All major brands (best with Gnarly Sealant)
GOT QUESTIONS? WE'VE GOT ANSWERS.
Use Yellow for low-pressure MTB & gravel setups (to 40 PSI). Use Black for road & high-pressure gravel (to 120 PSI).
Match the internal width of your rim, then round up 1–2mm.
Example: 30mm internal = 32mm tape.
One 5 Meter roll covers two 29” wheels with overlap
Clean the rim bed, apply with firm pressure, maintain tension, and finish with 10cm overlap. Pierce the valve hole carefully.
Yes - the adhesive is strong but forgiving. You can lift and reset during install without losing stick. Just take your time, don't rush it, installing tape incorrectly is the biggest reason tubeless installs fail.
Yes. The adhesive and seal are designed to hold up under low PSI and insert compression.
Yes - but for best results, pair with Gnarly Sealant + High-Flow Valves.
Yes, Gnarly Sticky Tape is compatible with both when installed correctly.